How To: Receive Updates on your PAX Device

This feature is available as of RepairQ 1.9

For a number of reasons, sometimes your PAX device configuration needs to be updated. Updates are received over the internet directly to your PAX device (when it is connected).

If you need to receive a new update on your PAX device, there are a few steps you must perform first.

Clearing the PAX Device Database on a PAX S300

  1. Access the menu by pressing the blue "FUNC" key and 1 at the same time
  2. Enter your device password (default is current date in MMDDYYYY format) and press the green enter key
  3. Press the down arrow
  4. Press 1. System Settings
  5. Press 4. Database
  6. Enter your device password (default is current date in MMDDYYYY format) and press the green enter key
  7. Press 1. Clear Database
  8. Press Yes
  9. Press 1. All

 

Clearing the PAX Device Database on a PAX D210

  1. Access the menu by pressing the Menu key. Screen_Shot_2018-12-17_at_12.54.40_PM.png
  2. Enter your device password (default is current date in MMDDYYYY format) and press the green enter key
  3. Press the down arrow
  4. Press 2. System Settings
  5. Press 4. Database
  6. Enter your device password (default is current date in MMDDYYYY format) and press the green enter key
  7. Press 1. Clear Database
  8. Press Enter = Yes
  9. Press 1. All

 

Power Cycle the device

After clearing the PAX device database, you need to power cycle your device. For the S300, unplug the power cable from the device, and then plug it back in. For the D210, press and hold the Cancel button until a pop-up prompts you to press FUNC = Reboot.

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.