How To: Change the LAN type on the PAX Device on a PAX D210

Depending on your local network, you may need to set your PAX device to use either Static LAN Mode or DHCP LAN mode.

 

Setting DCHP (letting the router assign an IP address) on your PAX S300 payment terminal device. For the PAX S300 click here.

You may need to let the router assign an IP address for your device, particularly when setting up the device for the first time.

  1. Press Menu Screen_Shot_2018-12-17_at_12.54.40_PM.png key on your device.
  2. Enter your password and press the green, Enter key. (default password is the current date in MM/DD/YYYY format)
  3. Scroll down one page and press "3. Communication"
  4. Enter your password again.
  5. Scroll down one page and press "3. WiFi Parameters"
  6. Press "4. DHCP Type"
  7. Press "1. DHCP"
  8. Go back to the home screen by using the back button on the screen, or the red, Cancel button several times.
  9. Go back into Lan Type and verify DHCP is selected before proceeding.
  10. Go back to the home screen by using the back button on the screen several times.

You will need to power cycle (press and hold the Cancel button until the pop-up prompts you for FUNC = Reboot) the device for it to receive a new IP address from the router.

 

Using a static IP address on your PAX payment terminal device

If the IP address assigned to your PAX device changes, you will need to update the IP address in your RepairQ Payment Device settings before the point of sale will be able to communicate with the device again. To prevent this from happening, you can setup the device to use a static IP. Here is how:

  1. Press Menu or "FUNC" and "1" at the same time
  2. Enter your password and press the green, Enter key. (default password is the current date in MM/DD/YYYY format)
  3. Scroll down 1 page and press "3. Communication"
  4. Enter your password again
  5. Scroll down 1 page and press "3. WiFi Parameters"
  6. Press "1. DHCP Type"
  7. Press "2. Static"
  8. Go back to the home screen by using the back button on the screen or the red, Cancel button several times.
  9. Go back into Lan Type and verify DHCP is selected before proceeding.
  10. Go back to the home screen by using the back button on the screen or the red, Cancel button several times.
Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.